The use of modern methods of panel preparation and bonding, taking into account the experience of Russian materials, allows for savings of up to 20% in adhesive compared to imported counterparts.
Automated lines for
continuous production
of sandwich panels
Russian manufacturer of sandwich panel continuous laminating production lines
The possibility to install line on facilities from 1 000 sq.m. and more
High line output: up to 8 m³/min.
Personal: from 8 labours
-20%
30 m
Savings calculation:
With "Automated sheet metal stitching", there is no need to use idle metal when changing to a different type or RAL of sheet metal
up to 30 m of sheet metal savings per coil
6 mon.
The payback period is from 6 months, subject to 100% capacity utilization.
24/7
Automated control of the state of the system, online accounting of products, adjustment of technological factors affecting the quality of products.
Modular line system for the continuous production of sandwich panel continuous laminating production lines
Specifications
- Output: up to 4 000 m²/shift
- Personal: from 8 labours
- The possibility to install line on facilities from 1 000 sq.m. and more.
- 3 types of equipment control system to choose from: Simens, Mitsubishi, Kinko
- 5 off profiling types
- 3 Joint types + customised lock design according to customer's drawings
- Length of Caterpillar type iM-Press only 6-12 m, allows you to save speed and production volume without loss of quality
- Ability to integrate into current lines of other manufactures
Specifications
Specifications of sandwich panel continuous laminating production lines
«Optimal»
Provides a high degree of automation and a wide range of output product
Output:
80 000 m²/month
Personal:
from 3 labours
Range of products:
wall and roof panels
Panel thickness:
50 mm to 350 mm
Length:
2.5 to 13 meters
Wall panel width:
1190 mm
Roof panel width:
1000 mm
«Basic»
Provides the possibility of further modernization and guaranteed quality of output product
Output:
40 000 m²/month
Personal:
from 10 labours
Range of products:
wall and roof panels
Panel thickness:
50 mm to 350 mm
Length:
2.5 to 13 meters
Wall panel width:
1190 mm
Roof panel width:
1000 mm
Output products comply in acc. to GOST standard 32603-2021
This means you can participate in any public tenders in Russia and sell your products to large companies
- Panel thickness: 50 to 350 mm
- Length of panels: 2.5 to 13 m (optionaly longer)
- Panel width: 1190 mm (wall panels) 1000 mm (roof)
- Core: mineral wool, lamellas, EPS and PIR blocks
- Density mineral wool: 95 -115 kg/m³
Joint types customised lock design according to customer's drawings
Z-lock
Significantly increases the speed of installation, increases the fire resistance of the structure, ensures minimum heat loss with proper sealing of joints.
Roof lock
The classic design of the roof joint, ensures a reliable sealing of the joints.
Secret Fix
Increases thermal insulation with aesthetics, inferior to the Z-Lock in terms of speed of installation.
5 off profiling types
Payment
Standard conditions
Standard conditions payment of the main stage after signing the contract. Payment is made according to individual conditions, which are prescribed in the contract. As a rule, this is:
- 60% of the cost of the supplied equipment is an advance payment
- 30% when ready for shipment
- 10% after the NDT and commissioning of the supplied equipment
Warranty service for 12 months from the date of launching the line.
Installation and commissioning
Post-warranty service and technical support
Customer staff training
Control of all technical and technological
processes of production
Computer production management platform
Stores and analyzes data on technical processes and events in real time
Collects and aggregates data from all stages of production
Connects the causes of the malfunction and the operating time
Integrates robotic systems and technologies
Combines network infrastructure: wired and wireless
Controls any parameter on a mobile device
Excludes unplanned downtime and non-conditioning
Prevents emergencies and increases the level of safety
View other modules and sections of sandwich panel continuous laminating production lines
US. 2.1 Laminator
Laminator forms sandwich panel locks, applies adhesive, brings together the cladding and the mineral wool mat for subsequent feeding into the press.
KL.4.7 Reception roller conveyor
Reception roller conveyor is a driven roller conveyor with guides, designed for receiving lamellas of mineral wool boards.
UG. 3.3 Vacuum stacker
Vacuum stacker is designed for lifting, handling and stacking finished sandwich panels.
UG. 3.2 Finished panel roller conveyor
Finished panel roller conveyor is designed for handling finished sandwich panels.
CARP-T (Automated cutting and feeding of trapeze lamellas into the roof panel)
Automated cutting and feeding of trapeze lamellas into the roof panel is designed for cutting and stacking trapezoidal lamellas into the bottom flashing of a continuous sandwich panel roofing blank. CompositionThe system consists of a sawmill for cutting trapezoidal lamellas, a handling device for transferring trapezia, a system of transport conveyors and turners, a group […]
US.2.2.2 Adhesive components supply station
Adhesive components supply station is designed for supplying components, pre-mixing, dosing two-component polyurethane adhesive and its uniform application in the production of sandwich panels filled with mineral wool with liners of structured metal and glass wool on the lines of continuous operation.
Our completed projects
2021-2023
Stitching and non-stop metal coil replacement section
2022-2023
CARP-L
Mineral wool core automatic lamella cutting and feeding unit
2022-2023
Thickness calibration module
2021-2023
Core pushing table
Mineral wool core automatic lamella cutting and feeding unit (CARP-L)
2022-2023
Mineral wool core automatic lamella cutting and feeding unit (CARP-L)
Automated cutting and feeding of trapeze lamellas into the roof panel (CARP-T)
2020-2023
“No mist“ spray adhesive applicator
