US.2.2.2 Adhesive components supply station

Adhesive components supply station is designed for supplying components, pre-mixing, dosing two-component polyurethane adhesive and its uniform application in the production of sandwich panels filled with mineral wool with liners of structured metal and glass wool on the lines of continuous operation.

Specification

The adhesive components are mixed automatically.
Message us

View other modules and sections of sandwich panel continuous laminating production lines

UG.3.1 Cut-off flying band saw with encoder

UG.3.1 Cut-off flying band saw with encoder

Cut-off flying band saw with encoder is designed for cutting continuous sandwich panel blanks coming out of the press into finished sandwich panels of a given length. It is equipped with automation for synchronization with other modules of the line and precise work without operator’s interference.

KL.4.1 Thickness calibration module

KL.4.1 Thickness calibration module

Thickness calibration module is designed to calibrate the thickness of a mineral wool board. Mineral wool thickness pre-calibration allows the production of mineral wool boards with the same geometric dimensions, which in turn reduces the load on the cutters of the disc cutoff block.

UP. 1.11 Deep Profiled Roof module

UP. 1.11 Deep Profiled Roof module

Deep Profiled Roof module is designed for the manufacture of the bottom flashing for a roof sandwich panel.Deep Profiled Roof module is designed for the manufacture of the bottom flashing for a roof sandwich panel.

UG. 3.5 Strech film wrapper

UG. 3.5 Strech film wrapper

Strech film wrapper is designed for continuous packing of stacks of finished sandwich panels into stretch film.The packaging of output products is the last process in sandwich panel continuous laminating production line and is necessary to prevent contamination of the panel surface, rust on the cut surface and damage to the product. Panels, once in […]

PR. 9 Caterpillar type press / iM-Press 9020 (9 m)

PR. 9 Caterpillar type press / iM-Press 9020 (9 m)

Caterpillar type press / iM-Press 9020 is designed to operate as part of a sandwich panel continuous laminating production lines and is used for uniform compression of the sandwich panel blank produced in a continuous production cycle.The tracked press unit comprises a superimposed upper and lower frame structure, designed for uniform compression of the sandwich […]

UG. 3.9 Feeding unit for polystyrene blocks

UG. 3.9 Feeding unit for polystyrene blocks

Feeding unit for polystyrene blocks is designed for automatic lining of polystyrene blocks under the pile of sandwich panels before their packing.

Sandwich panel production lines

«Optimal»

Provides a high degree of automation and a wide range of output product

«Basic»

Provides the possibility of further modernization and guaranteed quality of output product

Warranty service for 12 months from the date of launching the line.

Installation and commissioning

Post-warranty service and technical support

Post-warranty service and technical support

Do you have a non-standard project? Contact us

Do you want to know more about our sandwich panel lines technology? Send us your enquiry.
Our team will promptly contact you to provide you more information and follow your needs.

Nevskiy Oleg

Nevskiy Oleg

Sales Director
Message us
Nevskiy Oleg

Nevskiy Oleg

Sales Director

Thanks! Your application has been accepted

Our specialist will call you back during the day