...

UG. 3.3 Vacuum stacker

Vacuum stacker is designed for lifting, handling and stacking finished sandwich panels.

Specification

  • Length, mm: 11150
  • Width, mm.: 10700
  • Height, mm.: 4250
  • Weight, kg.: 3830
  • Mains voltage, V - Hz : 220/380В-50Гц
  • Power consumption, kW: 11
Ability to work in automatic and manual modes.
Message us

View other modules and sections of sandwich panel continuous laminating production lines

US. 2.1 Laminator

US. 2.1 Laminator

Laminator forms sandwich panel locks, applies adhesive, brings together the cladding and the mineral wool mat for subsequent feeding into the press.

KL.4.1 Thickness calibration module

KL.4.1 Thickness calibration module

Thickness calibration module is designed to calibrate the thickness of a mineral wool board. Mineral wool thickness pre-calibration allows the production of mineral wool boards with the same geometric dimensions, which in turn reduces the load on the cutters of the disc cutoff block.

UP. 1.1 Decolers (10 tonnes) (3 units) andУП 1.2 Hydraulic driven undercarriages (3 units)

UP. 1.1 Decolers (10 tonnes) (3 units) andУП 1.2 Hydraulic driven undercarriages (3 units)

Decolers are designed for continuous uncoiling of sheet metal from the coil on a sandwich panel production line. The feed speed of the thin sheet metal coil is automatically adjusted.

UP. 1.12 Disc cutoff block

UP. 1.12 Disc cutoff block

Disc cutoff block is designed for milling “quarters” for locks on the lining of sandwich panels, as well as calibration of the width of the mineral wool mat.

CARP-T (Automated cutting and feeding of trapeze lamellas into the roof panel)

CARP-T (Automated cutting and feeding of trapeze lamellas into the roof panel)

Automated cutting and feeding of trapeze lamellas into the roof panel is designed for cutting and stacking trapezoidal lamellas into the bottom flashing of a continuous sandwich panel roofing blank. CompositionThe system consists of a sawmill for cutting trapezoidal lamellas, a handling device for transferring trapezia, a system of transport conveyors and turners, a group […]

UP.1.5 Trapeze lamella multiblade disc saw

UP.1.5 Trapeze lamella multiblade disc saw

Trapeze lamella multiblade disc saw is designed to cut the mineral wool panel into trapezoidal lamellas, which are then placed in the bottom lining of the roof sandwich panel.

Sandwich panel production lines

«Оптимальная»

производственная линия с высокой степенью автоматизации и широким ассортиментом выпускаемой продукции

«Базовая»

производственная линия с возможностью дальнейшей модернизации и гарантированным качеством готовой продукции

Гарантия 12 месяцев после запуска линии

Монтаж и пуско-наладочные работы

Постгарантийное и сервисное обслуживание

Постгарантийное и сервисное обслуживание

У вас нестандартный проект или вы не знаете, как правильно все рассчитать перед запуском производства?

Оставьте заявку или напишите в мессенджеры, и мы ответим на все вопросы и поможем с созданием линии по производству сэндвич-панелей или ее расширением

Невский Олег Александрович

Невский Олег Александрович

Директор по продажам
Message us
Невский Олег Александрович

Невский Олег Александрович

Директор по продажам

Thanks! Your application has been accepted

Our specialist will call you back during the day

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.