KL.4.7 Reception roller conveyor
Reception roller conveyor is a driven roller conveyor with guides, designed for receiving lamellas of mineral wool boards.
View other modules and sections of sandwich panel continuous laminating production lines
KL. 4.15 Multi-blade disc lamella saw
Multi-blade disc lamella saw is designed for cutting mineral wool boards into lamellas of a given width. It is completed with interchangeable shafts for adjustment to the desired lamella width.
US. 2.1 Laminator
Laminator forms sandwich panel locks, applies adhesive, brings together the cladding and the mineral wool mat for subsequent feeding into the press.
KL. 4.5 Core pushing table
Core pushing table is designed for continuous feeding of the mineral wool slats into the line. The lamellas are joined to form a continuous staggered mineral wool mat in according to Interstate Standard (GOST).
UP.1.5 Trapeze lamella multiblade disc saw
Trapeze lamella multiblade disc saw is designed to cut the mineral wool panel into trapezoidal lamellas, which are then placed in the bottom lining of the roof sandwich panel.
UG. 3.9 Feeding unit for polystyrene blocks
Feeding unit for polystyrene blocks is designed for automatic lining of polystyrene blocks under the pile of sandwich panels before their packing.
UG. 3.3 Vacuum stacker
Vacuum stacker is designed for lifting, handling and stacking finished sandwich panels.
Sandwich panel production lines
«Basic»
Provides the possibility of further modernization and guaranteed quality of output product
Warranty service for 12 months from the date of launching the line.
Installation and commissioning
Post-warranty service and technical support
Post-warranty service and technical support
