UP. 1.12 Disc cutoff block

Disc cutoff block is designed for milling “quarters” for locks on the lining of sandwich panels, as well as calibration of the width of the mineral wool mat.

Specification

  • Length, mm: 2393
  • Width, mm.: 1992
  • Height, mm.: 2013
  • Weight, kg.: 2265
  • Mains voltage, V - Hz : 220/380В-50Гц
  • Power consumption, kW: 20,5
Message us

View other modules and sections of sandwich panel continuous laminating production lines

UG. 3.11 Turn over unit

UG. 3.11 Turn over unit

Turn over unit is designed to turn the finished roof sandwich panels, which are then stacked into a stack with the ribs facing each other. This reduces the height of the finished pile of shipped products and prevent damage to the edges of the panels during further transportation.

PR. 9 Caterpillar type press / iM-Press 9020 (9 m)

PR. 9 Caterpillar type press / iM-Press 9020 (9 m)

Caterpillar type press / iM-Press 9020 is designed to operate as part of a sandwich panel continuous laminating production lines and is used for uniform compression of the sandwich panel blank produced in a continuous production cycle.The tracked press unit comprises a superimposed upper and lower frame structure, designed for uniform compression of the sandwich […]

KL.4.7 Reception roller conveyor

KL.4.7 Reception roller conveyor

Reception roller conveyor is a driven roller conveyor with guides, designed for receiving lamellas of mineral wool boards.

KL.4.1 Thickness calibration module

KL.4.1 Thickness calibration module

Thickness calibration module is designed to calibrate the thickness of a mineral wool board. Mineral wool thickness pre-calibration allows the production of mineral wool boards with the same geometric dimensions, which in turn reduces the load on the cutters of the disc cutoff block.

UG.3.1 Cut-off flying band saw with encoder

UG.3.1 Cut-off flying band saw with encoder

Cut-off flying band saw with encoder is designed for cutting continuous sandwich panel blanks coming out of the press into finished sandwich panels of a given length. It is equipped with automation for synchronization with other modules of the line and precise work without operator’s interference.

UG. 3.3 Vacuum stacker

UG. 3.3 Vacuum stacker

Vacuum stacker is designed for lifting, handling and stacking finished sandwich panels.

Sandwich panel production lines

«Optimal»

Provides a high degree of automation and a wide range of output product

«Basic»

Provides the possibility of further modernization and guaranteed quality of output product

Warranty service for 12 months from the date of launching the line.

Installation and commissioning

Post-warranty service and technical support

Post-warranty service and technical support

Do you have a non-standard project? Contact us

Do you want to know more about our sandwich panel lines technology? Send us your enquiry.
Our team will promptly contact you to provide you more information and follow your needs.

Nevskiy Oleg

Nevskiy Oleg

Sales Director
Message us
Nevskiy Oleg

Nevskiy Oleg

Sales Director

Thanks! Your application has been accepted

Our specialist will call you back during the day