UG. 3.9 Feeding unit for polystyrene blocks

Feeding unit for polystyrene blocks is designed for automatic lining of polystyrene blocks under the pile of sandwich panels before their packing.

Specification

  • Length, mm: 2302
  • Width, mm.: 4028
  • Height, mm.: 2044
  • Weight, kg.: 570
  • Mains voltage, V - Hz : 220/380В-50Гц
  • Power consumption, kW: 0,37
Automatic feeding of polystyrene blocks without an operator
Message us

View other modules and sections of sandwich panel continuous laminating production lines

UG.3.1 Cut-off flying band saw with encoder

UG.3.1 Cut-off flying band saw with encoder

Cut-off flying band saw with encoder is designed for cutting continuous sandwich panel blanks coming out of the press into finished sandwich panels of a given length. It is equipped with automation for synchronization with other modules of the line and precise work without operator’s interference.

UG. 3.9 Feeding unit for polystyrene blocks

UG. 3.9 Feeding unit for polystyrene blocks

Feeding unit for polystyrene blocks is designed for automatic lining of polystyrene blocks under the pile of sandwich panels before their packing.

UP. 1.11 Deep Profiled Roof module

UP. 1.11 Deep Profiled Roof module

Deep Profiled Roof module is designed for the manufacture of the bottom flashing for a roof sandwich panel.Deep Profiled Roof module is designed for the manufacture of the bottom flashing for a roof sandwich panel.

US. 2.1 Laminator

US. 2.1 Laminator

Laminator forms sandwich panel locks, applies adhesive, brings together the cladding and the mineral wool mat for subsequent feeding into the press.

CARP-T (Automated cutting and feeding of trapeze lamellas into the roof panel)

CARP-T (Automated cutting and feeding of trapeze lamellas into the roof panel)

Automated cutting and feeding of trapeze lamellas into the roof panel is designed for cutting and stacking trapezoidal lamellas into the bottom flashing of a continuous sandwich panel roofing blank. CompositionThe system consists of a sawmill for cutting trapezoidal lamellas, a handling device for transferring trapezia, a system of transport conveyors and turners, a group […]

UP. 1.1 Decolers (10 tonnes) (3 units) andУП 1.2 Hydraulic driven undercarriages (3 units)

UP. 1.1 Decolers (10 tonnes) (3 units) andУП 1.2 Hydraulic driven undercarriages (3 units)

Decolers are designed for continuous uncoiling of sheet metal from the coil on a sandwich panel production line. The feed speed of the thin sheet metal coil is automatically adjusted.

Sandwich panel production lines

«Optimal»

Provides a high degree of automation and a wide range of output product

«Basic»

Provides the possibility of further modernization and guaranteed quality of output product

Warranty service for 12 months from the date of launching the line.

Installation and commissioning

Post-warranty service and technical support

Post-warranty service and technical support

Do you have a non-standard project? Contact us

Do you want to know more about our sandwich panel lines technology? Send us your enquiry.
Our team will promptly contact you to provide you more information and follow your needs.

Nevskiy Oleg

Nevskiy Oleg

Sales Director
Message us
Nevskiy Oleg

Nevskiy Oleg

Sales Director

Thanks! Your application has been accepted

Our specialist will call you back during the day