UG. 3.10 Dust extruction unit (XXX m3/hour)

Dust extruction unit is designed to remove mineral wool swarf and dust from the cutting area.The contaminated air, together with the swarf from the work area, is conveyed by a fan through suction hoses to the unit, where larger dust particles are blown against the housing walls, lose speed and fall into the dust collector. […]

Specification

  • Length, mm: 5177
  • Width, mm.: 1744
  • Height, mm.: 5050
  • Weight, kg.: 5300
  • Mains voltage, V - Hz : 220/380В-50Гц
  • Power consumption, kW: 22,5
Filter sleeves are optimized for mineral wool applications
Message us

View other modules and sections of sandwich panel continuous laminating production lines

UP. 1.12 Disc cutoff block

UP. 1.12 Disc cutoff block

Disc cutoff block is designed for milling “quarters” for locks on the lining of sandwich panels, as well as calibration of the width of the mineral wool mat.

KL.4.7 Reception roller conveyor

KL.4.7 Reception roller conveyor

Reception roller conveyor is a driven roller conveyor with guides, designed for receiving lamellas of mineral wool boards.

PR. 9 Caterpillar type press / iM-Press 9020 (9 m)

PR. 9 Caterpillar type press / iM-Press 9020 (9 m)

Caterpillar type press / iM-Press 9020 is designed to operate as part of a sandwich panel continuous laminating production lines and is used for uniform compression of the sandwich panel blank produced in a continuous production cycle.The tracked press unit comprises a superimposed upper and lower frame structure, designed for uniform compression of the sandwich […]

UG. 3.9 Feeding unit for polystyrene blocks

UG. 3.9 Feeding unit for polystyrene blocks

Feeding unit for polystyrene blocks is designed for automatic lining of polystyrene blocks under the pile of sandwich panels before their packing.

UG. 3.10 Dust extruction unit (XXX m3/hour)

UG. 3.10 Dust extruction unit (XXX m3/hour)

Dust extruction unit is designed to remove mineral wool swarf and dust from the cutting area.The contaminated air, together with the swarf from the work area, is conveyed by a fan through suction hoses to the unit, where larger dust particles are blown against the housing walls, lose speed and fall into the dust collector. […]

KL. 4.15 Multi-blade disc lamella saw

KL. 4.15 Multi-blade disc lamella saw

Multi-blade disc lamella saw is designed for cutting mineral wool boards into lamellas of a given width. It is completed with interchangeable shafts for adjustment to the desired lamella width.

Sandwich panel production lines

«Optimal»

Provides a high degree of automation and a wide range of output product

«Basic»

Provides the possibility of further modernization and guaranteed quality of output product

Warranty service for 12 months from the date of launching the line.

Installation and commissioning

Post-warranty service and technical support

Post-warranty service and technical support

Do you have a non-standard project? Contact us

Do you want to know more about our sandwich panel lines technology? Send us your enquiry.
Our team will promptly contact you to provide you more information and follow your needs.

Nevskiy Oleg

Nevskiy Oleg

Sales Director
Message us
Nevskiy Oleg

Nevskiy Oleg

Sales Director

Thanks! Your application has been accepted

Our specialist will call you back during the day