UG.3.1 Cut-off flying band saw with encoder
Cut-off flying band saw with encoder is designed for cutting continuous sandwich panel blanks coming out of the press into finished sandwich panels of a given length. It is equipped with automation for synchronization with other modules of the line and precise work without operator’s interference.
View other modules and sections of sandwich panel continuous laminating production lines
KL.4.1 Thickness calibration module
Thickness calibration module is designed to calibrate the thickness of a mineral wool board. Mineral wool thickness pre-calibration allows the production of mineral wool boards with the same geometric dimensions, which in turn reduces the load on the cutters of the disc cutoff block.
UG. 3.3 Vacuum stacker
Vacuum stacker is designed for lifting, handling and stacking finished sandwich panels.
PR. 9 Caterpillar type press / iM-Press 9020 (9 m)
Caterpillar type press / iM-Press 9020 is designed to operate as part of a sandwich panel continuous laminating production lines and is used for uniform compression of the sandwich panel blank produced in a continuous production cycle.The tracked press unit comprises a superimposed upper and lower frame structure, designed for uniform compression of the sandwich […]
KL.4.6 Buffer roller conveyor
Buffer roller conveyor is a driven roller conveyor with guides, designed for handling lamellas of mineral wool boards.
CARP-T (Automated cutting and feeding of trapeze lamellas into the roof panel)
Automated cutting and feeding of trapeze lamellas into the roof panel is designed for cutting and stacking trapezoidal lamellas into the bottom flashing of a continuous sandwich panel roofing blank. CompositionThe system consists of a sawmill for cutting trapezoidal lamellas, a handling device for transferring trapezia, a system of transport conveyors and turners, a group […]
UG. 3.10 Dust extruction unit (XXX m3/hour)
Dust extruction unit is designed to remove mineral wool swarf and dust from the cutting area.The contaminated air, together with the swarf from the work area, is conveyed by a fan through suction hoses to the unit, where larger dust particles are blown against the housing walls, lose speed and fall into the dust collector. […]
Sandwich panel production lines
«Basic»
Provides the possibility of further modernization and guaranteed quality of output product
Warranty service for 12 months from the date of launching the line.
Installation and commissioning
Post-warranty service and technical support
Post-warranty service and technical support
