KL.4.6 Buffer roller conveyor
Buffer roller conveyor is a driven roller conveyor with guides, designed for handling lamellas of mineral wool boards.
View other modules and sections of sandwich panel continuous laminating production lines
UG. 3.9 Feeding unit for polystyrene blocks
Feeding unit for polystyrene blocks is designed for automatic lining of polystyrene blocks under the pile of sandwich panels before their packing.
UG. 3.3 Vacuum stacker
Vacuum stacker is designed for lifting, handling and stacking finished sandwich panels.
UG.3.1 Cut-off flying band saw with encoder
Cut-off flying band saw with encoder is designed for cutting continuous sandwich panel blanks coming out of the press into finished sandwich panels of a given length. It is equipped with automation for synchronization with other modules of the line and precise work without operator’s interference.
KL.4.1 Thickness calibration module
Thickness calibration module is designed to calibrate the thickness of a mineral wool board. Mineral wool thickness pre-calibration allows the production of mineral wool boards with the same geometric dimensions, which in turn reduces the load on the cutters of the disc cutoff block.
KL. 4.5 Core pushing table
Core pushing table is designed for continuous feeding of the mineral wool slats into the line. The lamellas are joined to form a continuous staggered mineral wool mat in according to Interstate Standard (GOST).
PR. 9 Caterpillar type press / iM-Press 9020 (9 m)
Caterpillar type press / iM-Press 9020 is designed to operate as part of a sandwich panel continuous laminating production lines and is used for uniform compression of the sandwich panel blank produced in a continuous production cycle.The tracked press unit comprises a superimposed upper and lower frame structure, designed for uniform compression of the sandwich […]
Sandwich panel production lines
«Basic»
Provides the possibility of further modernization and guaranteed quality of output product
Warranty service for 12 months from the date of launching the line.
Installation and commissioning
Post-warranty service and technical support
Post-warranty service and technical support
