KL. 4.5 Core pushing table

Core pushing table is designed for continuous feeding of the mineral wool slats into the line. The lamellas are joined to form a continuous staggered mineral wool mat in according to Interstate Standard (GOST).

Specification

  • Length, mm: 4250
  • Width, mm.: 2350
  • Height, mm.: 1710
  • Weight, kg.: 700
  • Mains voltage, V - Hz : 220/380В-50Гц
  • Power consumption, kW: 1,5
Continuous supply of "ladder"-type mineral wool slats in acc. to GOST standard 32603-2021
Message us

View other modules and sections of sandwich panel continuous laminating production lines

UP. 1.1 Decolers (10 tonnes) (3 units) andУП 1.2 Hydraulic driven undercarriages (3 units)

UP. 1.1 Decolers (10 tonnes) (3 units) andУП 1.2 Hydraulic driven undercarriages (3 units)

Decolers are designed for continuous uncoiling of sheet metal from the coil on a sandwich panel production line. The feed speed of the thin sheet metal coil is automatically adjusted.

UG. 3.3 Vacuum stacker

UG. 3.3 Vacuum stacker

Vacuum stacker is designed for lifting, handling and stacking finished sandwich panels.

PR. 9 Caterpillar type press / iM-Press 9020 (9 m)

PR. 9 Caterpillar type press / iM-Press 9020 (9 m)

Caterpillar type press / iM-Press 9020 is designed to operate as part of a sandwich panel continuous laminating production lines and is used for uniform compression of the sandwich panel blank produced in a continuous production cycle.The tracked press unit comprises a superimposed upper and lower frame structure, designed for uniform compression of the sandwich […]

UG. 3.9 Feeding unit for polystyrene blocks

UG. 3.9 Feeding unit for polystyrene blocks

Feeding unit for polystyrene blocks is designed for automatic lining of polystyrene blocks under the pile of sandwich panels before their packing.

UP. 1.11 Deep Profiled Roof module

UP. 1.11 Deep Profiled Roof module

Deep Profiled Roof module is designed for the manufacture of the bottom flashing for a roof sandwich panel.Deep Profiled Roof module is designed for the manufacture of the bottom flashing for a roof sandwich panel.

UG.3.1 Cut-off flying band saw with encoder

UG.3.1 Cut-off flying band saw with encoder

Cut-off flying band saw with encoder is designed for cutting continuous sandwich panel blanks coming out of the press into finished sandwich panels of a given length. It is equipped with automation for synchronization with other modules of the line and precise work without operator’s interference.

Sandwich panel production lines

«Optimal»

Provides a high degree of automation and a wide range of output product

«Basic»

Provides the possibility of further modernization and guaranteed quality of output product

Warranty service for 12 months from the date of launching the line.

Installation and commissioning

Post-warranty service and technical support

Post-warranty service and technical support

Do you have a non-standard project? Contact us

Do you want to know more about our sandwich panel lines technology? Send us your enquiry.
Our team will promptly contact you to provide you more information and follow your needs.

Nevskiy Oleg

Nevskiy Oleg

Sales Director
Message us
Nevskiy Oleg

Nevskiy Oleg

Sales Director

Thanks! Your application has been accepted

Our specialist will call you back during the day