CARP-L (Mineral wool core automatic lamella cutting and feeding unit)

CARP-L is designed for automated cutting of mineral wool boards into lamellas, turning of lamellas and forming of mineral wool filling mat.

Specification

  • Length, mm: 22400
  • Width, mm.: 11300
  • Height, mm.: 4000
  • Weight, kg.: 48800
  • Mains voltage, V - Hz : 380 В – 50 Гц
  • Power consumption, kW: 65
The process of cutting and feeding of the lamellas is automatic, eliminating the human factor, which eliminates kinks, deflections and damage to the wool. High speed of operation: up to 8 m/min, allows to increase productivity of the line.

View other modules and sections of sandwich panel continuous laminating production lines

CARP-T (Automated cutting and feeding of trapeze lamellas into the roof panel)

CARP-T (Automated cutting and feeding of trapeze lamellas into the roof panel)

Automated cutting and feeding of trapeze lamellas into the roof panel is designed for cutting and stacking trapezoidal lamellas into the bottom flashing of a continuous sandwich panel roofing blank. CompositionThe system consists of a sawmill for cutting trapezoidal lamellas, a handling device for transferring trapezia, a system of transport conveyors and turners, a group […]

UP. 1.11 Deep Profiled Roof module

UP. 1.11 Deep Profiled Roof module

Deep Profiled Roof module is designed for the manufacture of the bottom flashing for a roof sandwich panel.Deep Profiled Roof module is designed for the manufacture of the bottom flashing for a roof sandwich panel.

KL.4.7 Reception roller conveyor

KL.4.7 Reception roller conveyor

Reception roller conveyor is a driven roller conveyor with guides, designed for receiving lamellas of mineral wool boards.

KL.4.1 Thickness calibration module

KL.4.1 Thickness calibration module

Thickness calibration module is designed to calibrate the thickness of a mineral wool board. Mineral wool thickness pre-calibration allows the production of mineral wool boards with the same geometric dimensions, which in turn reduces the load on the cutters of the disc cutoff block.

UG. 3.9 Feeding unit for polystyrene blocks

UG. 3.9 Feeding unit for polystyrene blocks

Feeding unit for polystyrene blocks is designed for automatic lining of polystyrene blocks under the pile of sandwich panels before their packing.

UG. 3.11 Turn over unit

UG. 3.11 Turn over unit

Turn over unit is designed to turn the finished roof sandwich panels, which are then stacked into a stack with the ribs facing each other. This reduces the height of the finished pile of shipped products and prevent damage to the edges of the panels during further transportation.

Sandwich panel production lines

«Optimal»

Provides a high degree of automation and a wide range of output product

«Basic»

Provides the possibility of further modernization and guaranteed quality of output product

Warranty service for 12 months from the date of launching the line.

Installation and commissioning

Post-warranty service and technical support

Post-warranty service and technical support

Do you have a non-standard project? Contact us

Do you want to know more about our sandwich panel lines technology? Send us your enquiry.
Our team will promptly contact you to provide you more information and follow your needs.

Nevskiy Oleg

Nevskiy Oleg

Sales Director
Message us
Nevskiy Oleg

Nevskiy Oleg

Sales Director

Thanks! Your application has been accepted

Our specialist will call you back during the day